What are the dimensions of a microATX board?

What are the dimensions of a microATX board?

244 × 244 mm
The maximum size of a microATX motherboard is 9.6 × 9.6 in (244 × 244 mm). However, there are examples of motherboards using microATX designation despite having a smaller size of 244 × 205 mm (9.6 × 8.1 in). The standard ATX size is 25% longer, at 12 × 9.6 in (305 × 244 mm).

What is the difference between e ATX and ATX?

ATX is the standard form factor of the motherboard. EATX is nothing but a type of ATX with a bigger size. As of 2021, it is the de facto standard of the motherboard. EATX is the largest variant of the ATX board.

Will an ATX motherboard fit in an e ATX case?

ATX board will certainly fit in eATX motherboard tray. The tray has many form factors for the standoff to screw on. This is in general E-ATX PC case.

What is the difference between ATX and micro-ATX?

Micro ATX is one of the offshoots of ATX, and its main difference from the main ATX form factor is size. ATX retains a generally rectangular board size measuring 305mm. by 244mm. Micro ATX is a more even square which retains the 244mm.

Should I get ATX or EATX?

In terms of functionality, EATX performs better than ATX, how? Because EATX comes in a larger size, this means you get additional ports and slots for components. In an ATX board, you will usually find 3-4 PCI-e x 16 ports and 4 RAM slots, whereas in an EATX board, you will find 4-8 PCI-e x 16 ports and 6-8 RAM slots.

What is the difference between ATX and DTX?

Comparison. DTX is a shorter version of ATX and micro-ATX, and Mini-DTX is a slightly longer version of Mini-ITX. Mini-iTX can have only one expansion slot, whereas Mini-DTX has the same width and can have two expansion slots.

What are EATX motherboards used for?

Generally speaking, EATX motherboards are usually found and are made for servers, where there’s lots of extra space to fit the added hardware that’s usually needed to run server functions.

What is the difference between ATX and SSI CEB?

The SSI CEB specification was derived from the EEB and ATX specifications. SSI CEB motherboards have the same IO connector area and many of the same motherboard mounting holes as ATX motherboards, although SSI CEB motherboards are larger in size than ATX motherboards and have different processor mounting holes.

What is the difference between SSI-EEB and EEB motherboards?

Let’s repeat that, because it’s a point of confusion even among case and motherboard manufacturers: SSI-EEB is based on ATX and uses exactly the same hole placement with some alternative and extra holes thrown in. “Full” or “true” 13-inch EATX boards are EEB boards.

What does CEB stand for?

The Compact Electronics Bay Specification ( CEB) as well as EEB, MEB and TEB (“Thin Electronics Bay”) are standard form factors for dual or multi processor motherboards defined by the Server System Infrastructure (SSI) Forum.

What is the size of an EEB board?

EEB is interchangeable with SSI-EEB as a name for the form factor. The original EEB spec says that “the dimensions of this E-Bay are based on the standard AT board dimensions, 12 inches x 13 inches,” and it appears that most of the mounting holes are based on the now 36-year-old form factor as well, although component layout has changed.