What is phenolic sheet used for?
What is phenolic sheet used for?
Phenolic sheet is used in parts fabrication. These parts may be used in everything from electrical circuits and applications to bullet and storm protection equipment.
How strong is phenolic plastic?
Phenolics
| Resin material | Density (g/cm3) | Tensile strength (MPa) |
|---|---|---|
| Phenolic | 1.2–1.4 | 35–60 |
Is phenolic waterproof?
The plywood sheets are manufactured to a high standard, making them resistant to corrosion and moisture. The coating of the wood is phenolic resin and it is this coating that makes it waterproof.
What is the difference between HDPE and phenolic?
HDPE is made of high-density polyethylene resin and pigments. Phenolic partitions, on the other hand, are made of a melamine sheet and many layers of resin-impregnated kraft paper.
Does Garolite absorb water?
Garolite G-10 (also known as phenolic and epoxy-grade industrial laminate) is a composite material with a low coefficient of thermal expansion. Additionally, it does not absorb water and is an excellent insulator, which makes it really useful for electronics applications.
What is phenolic board?
Phenolic Boards are also referred to as phenolic panels, which are a type of plywood like material that is feigned with the help of woven fabrics or high density thermo-setting cellulose fabrics together with phenolic resins.
Can phenolic board be painted?
Painting phenolic plywood is not recommended, as most paints do not bond well with the surface. Painting requires special paints, and even then, there is a chance that the paint will peel off the slick surface of the phenolic.
Can you bend Garolite?
Commonly known as fiber-based composite, garolite like many composite materials are strong and more rigid than plastic, lighter than metal but cannot be bent or formed like polyethylene, nylon, or other common plastic materials due to tis rigid nature [14].
How strong is Garolite?
Garolite G-7 withstands temperatures up to 425° F—higher than any other grade of Garolite. While not as strong as Garolite G-9 sheets, these sheets and bars offer better arc resistance in dry environments and a higher level of electrical insulation.
Is phenolic hard?
While LE phenolic material is hard and dense, it is also relatively light – LE phenolic sheets are about half the weight of aluminum sheeting. Despite its lightness, the material features a high strength-to-weight ratio. The material’s moisture rate is 1.3 percent and it can withstand temperatures of up to 285°F.
Is phenolic safe?
Exposure to phenol may cause irritation to the skin, eyes, nose, throat, and nervous system. Some symptoms of exposure to phenol are weight loss, weakness, exhaustion, muscle aches, and pain. Severe exposure can cause liver and/or kidney damage, skin burns, tremor, convulsions, and twitching.
What is phenolic coating?
Epoxy Phenolic coating is a polyamine cured paint that has excellent resistance against solvents, chemicals, acids, and bases. It can be used as a protective coating for steel structures where chemical resistance and heat resistance up to 180 C is required.
How strong is phenolic board?
They are suitable in extreme weather conditions and can tolerate a temperature range from -112F to +356F. The reinforced strength of the phenolic panels makes them very easy to fabricate and easy to install, by using different fastening types. It also makes them resistant to scratches and impacts.
Can you cut Garolite on a table saw?
Its tough to cut! I make a lot of knives and cut it on the table saw with a regular ripping blade. I would think the more teeth the worse it’s gonna do. But yeah it’s tough stuff to cut and down right nasty but it’s a good product at the end of the day.
Can you laser cut Garolite?
Apparently, Garolite is also “Bakelite,” and is a really strange material. It does not seem suited to the laser cutter at all.