How do you smooth a surface with concrete?

Make Sure the Concrete Floor is Level If the concrete floor is sloped, self leveling cement can be applied to make the surface even. Ardex or other similar self leveling cementitous mixes can be applied and poured on to the surface and then ground afterwords just like regular concrete to get a smooth shine.

How can I make my concrete walls look better?

Incorporate a bench or cap your wall so it can be used as a seat wall. Try precast wall panels that can be embedded with decorative mosaics or given an exposed aggregate finish. Take a plain gray wall to the next level using concrete stains. Add fixtures that wash your wall with light, making it a nighttime focal point.

How do you skim coat a concrete wall?

Spread the cement onto the wall, using the flat side of the trowel to smooth the cement. Remove excess cement using the edge of the trowel in a scraping motion. Apply a thick enough coat to cover the surface with an even coat of cement. Allow the skim-coat to dry for 24 hours before painting.

Can you sand concrete to make it smooth?

You can absolutely sand concrete to achieve a smoother surface. Sanding concrete floors, walls and cement surfaces can be a relatively easy task if you have the right tools and use the correct procedures.

What is the smoothest concrete mix?

A Strong Start: The Best Concrete Mix for Every DIY Project

• BEST FOR TRADITIONAL CONCRETE SURFACES: Quikrete Concrete Mix.
• BEST FOR PROJECTS REQUIRING EXTRA STRENGTH: Quikrete 5000 Concrete Mix.
• BEST FOR SETTING POSTS: Quikrete Fast-Setting Concrete Mix.
• BEST FOR BUILDING CONCRETE COUNTERTOPS: Quikrete Countertop Mix.

How do you cover interior concrete walls?

You can hide your concrete blocks altogether by facing the wall with wood paneling. To do this, attach horizontal furring strips to the wall using a hammer drill and screws that are made to drive into concrete.

What do you skim coat concrete walls with?

Fill a 5-gallon bucket halfway with water and add skim-coat cement mix. Mix the cement with the water using an electric drill with a stirring bit installed. Continue to mix and add the powder until it is the consistency of thick wallpaper paste.

Can you put a thin layer of concrete over concrete?

Is it okay to pour concrete over existing concrete? Yes, you can put new concrete over old concrete providing there are no issues such as significant cracks of frost heaves with your existing concrete. A new layer of concrete should be about two inches to ensure an even, strong coverage.