What is 6F2 used for?

What is 6F2 used for?

6F2 Capping is mainly used a sub-base for roads and buildings, although it has many other uses such as Piling Mats and general backfill. The coarse nature of 6F2 Capping makes it suitable all in one product which when compacted forms a hard wearing surface.

Is 6F2 a waste?

We are regularly asked by our customers to remove or relocate 6F2 from their sites which has been used for temporary works. The material is then technically deemed a waste product. The problem occurs when you test the 6F2 from a waste perspective, the results frequently highlight contamination in the material.

Is 6F2 and 6F5 the same?

6F5 is an unbound, coarse recycled aggregate made from crushed hardcore and concrete and graded from 75mm down to dust. 6F2 can be used as bulk fill to build up levels, as a temporary hard standing, for firming up soft or wet ground or for use as a layer below Type 1 crushed/primary.

What does 6F2 mean?

What is 6F2 Recycled Capping? An aggregate composed of crushed concrete, brick and mortar produced as a by-product of demolition projects known in the trade as 6F2 Recycled Capping. Sizes range from 75mm down to dust.

What size is 6F2 stone?

6F2 – A very good general purpose aggregate which ranges in size from 75mm down to dust. This is ideal as an initial layer of hardcore. Especially as a sub-base for access roads, buildings, patios and driveways as the course nature of 6F2 make a very good hard wearing surface when compacted.

What is class 6F2 material?

Class 6F2 consists of selected granular material of a coarse grade with the exception of unburned colliery spoil. Class 6F3 is selected granular material that can contain any amount of granulated asphalt and recycled bituminous planings. This class excludes any material which contains tar or tar-bitumen binders.

Is 6F2 recycled?

Our 6F2 crushed concrete stone is a coarse recycled aggregate, with many benefits, it can be used for a wide range of construction and landscaping needs. This aggregate is a cost effective option because it is recycled. Crushed concrete driveways are far more cost effective than gravel driveways.

What size stone is 6F2?

6F2 is a heavy duty sub base derived from crushed stone, with all parts sized at 140mm and below (to dust).

Is 6F2 a Type 2?

Usage: 6F2 stone or type 2 crushed concrete is the by-product of demolition and is an inexpensive, coarse aggregate that can be used as a well-draining sub-base for various projects, including roads, pathways, patios, driveways and buildings.

What is Type 2 crushed concrete?

Type 2 crushed concrete in Surrey is a standard sub-base material mainly for road purposes such as filling in pot holes but it can be used for a range of other applications such as driveways, backfill material, patio areas, tracks, paths and foundations.