What is MIL-DTL-38999 Series III?
What is MIL-DTL-38999 Series III?
DEUTSCH DTS Series and ACT Series are the standard circular connector for use in harsh military and aerospace environments. High density layouts with up to 187 data connections and power contacts rated up to 23A.
What is MIL-DTL-38999?
MIL-DTL-38999 connectors are a high-performance cylindrical connector family designed for cable-to-panel I/O applications in military aerospace and other demanding situations. There are four unique connector series in the family: The Series 1 Bayonet. Series II Low-Profile Bayonet.
What is a MIL C?
MIL-DTL-5015 (formerly MIL-C-5015) describes threaded circular connectors with solderable or crimped contacts for commercial and military use. They are commonly used for electronics, electrical power, and control circuits, owing to their versatility, reliability, and ease of supply.
What does Mil DTL stand for?
defense detail spec
Some examples are: MIL-STD (defense standard) MIL-DTL (defense detail spec) MIL-PRF (defense performance spec) MIL-SPEC (defense specification).
What is scoop proof?
Scoop proof designs feature a longer shell on the pin half (receptacle or plug) of a connector. This allows the contacts to be slightly recessed, so that they will not be damaged if the mating shell is ‘scooped’ into it during mating. Often used with small 22 size contacts, which can be prone to bending.
How do I know what size my connector shell is?
The most common shell sizes are available in . 0625 increments starting at shell size 8 (. 50) to shell size 36 (2.25), i.e.: 24 shell size is determined by 24 x . 0625 = 1.50 outside diameter of the connector shell.
What is the difference between MIL C 5541 and MIL-DTL 5541?
MIL-DTL-5541 supersedes the MIL-C-5541 standard. MIL-DTL-5541 Type I specifies hexavalent chromium bath while MIL-DTL-5541 Type II is normally achieved with a tri-valent chromium bath. A print callout might read “Passivate per MIL-DTL-5541 Type I Class 1A” or “Passivation per MIL-DTL-5541 Type II Class 3”.
How good is military grade?
Military Grade is often used in advertising because we have been taught that it means higher quality. However, if a product is actually Military Grade it means that it has been tested to the specs of what the military would expect.
Is Mil C the same as MIL DTL?
Previously known as MIL-C-26482, MIL-DTL-26482 are space-efficient bayonet lock connectors.
What AR 15 are MIL-SPEC?
The chamber of a mil-spec AR-15 or M-16 is 5.56x45mm or 5.56 NATO, whereas a commercial AR-15 barrel can have a . 223 Remington chamber, or a 5.56 NATO chamber. The length of a mil-spec AR-15/M-16 barrel is 14.5” whereas the legally required barrel length for a rifle in the USA is 16” inches.
What is cannon plug?
A plug and socket used in professional audio equipment, lighting controls (see DMX512) and other applications. It uses a balanced connection and locks into the socket.
What is bulkhead connector?
A bulkhead is simply a connector that is installed through the face plate of a GracePort while the cable has one end fixed to the face plate and the other end is typically a 10′ cable that goes inside the cabinet. Bulkheads and cables are offered for a wide variety of our components, including USB, Ethernet, DB9, etc.