Where is the fuel reset button on a Ford Explorer?

The fuel pump shut-off switch is located behind an access panel in the right rear quarter trim panel, near the liftgate. The fuel pump shut-off switch has a red reset button on top of it.

Where is the inertia switch on a Ford Explorer?

Most are in the passenger side kick panel under the dash.

How do I reset my fuel pump safety switch?

RESETTING THE SWITCH

1. Turn the ignition switch OFF.
2. Ensure that there is no fuel leaking in the engine compartment, along any of the lines or at the tank.
3. If no leakage and/or odor is apparent, reset the switch by pushing the reset button on the top of the switch.

Where is the inertia switch on a 2003 Ford Explorer?

That just left the FPIS (fuel pressure inertia switch), which is located under the dash in the passenger foot area, just at the front edge of the carpet.

Where is the fuel pump reset button on a 2002 Ford Explorer?

To reset the fuel light on a ford explorer you will need to access the fuel reset switch which is located in the glove box or in the foot well of the passenger seat area, press that switch and the fuel system will be reset.

What does the fuel pump reset button do?

The switch will usually come with a reset button that will reactivate the fuel pump if the switch was tripped. The fuel pump switch is an electrical component, and just the same as the rest on the vehicle, over time it can wear out and develop issues.

How do I know if my inertia switch is bad?

A good switch will shut of the fuel pump when it detects that the vehicle has come to a sudden or violent stop, a faulty switch, however, may trip and shut off the fuel pump for no apparent reason, even when the vehicle is experiencing normal driving conditions.

How do I reset my fuel inertia switch?

Press down the rubber reset button on the top of the inertia switch. 3. Turn the ignition switch to position ‘II’, pause for a few seconds, then return the key to position ‘0’.