How do I fix my bluetooth on my ps3?

Restart the console by pressing the Power Button again.

Go to the Settings column and select Accessory Settings.
Select Manage Bluetooth Devices.
Highlight the device you would like to remove and press the Triangle button for the Options menu.
Select Delete from the Options menu.
Select Yes to confirm device deletion.

Where is the ps3 bluetooth located?

Select (Settings) > (Accessory Settings). 3. Select [Manage Bluetooth® Devices]. If you have registered one or more Bluetooth® devices, a list of registered devices is displayed.

What is a PS3 Bluetooth pass key?

To connect any headset to the PS3 via Bluetooth networking, you need to give a passkey. This key is for the headset and this allows the PS3 to access its network. By default, most wireless headsets should have the passkey set as either “0000” or “1234”.

How do I find my Bluetooth pass key?

How to Find a Bluetooth Passcode

Look on the back of your headset or speakerphone for the Bluetooth passcode for the device.
Go into the Bluetooth menu on your cell phone to find the passcode for your cell phone.
Go into the Settings menu for your computer to find its Bluetooth passcode.

What would cause a PS3 to not turn on?

One cause of the PlayStation 3 not booting is a faulty power supply. A much smaller percentage of PS3 consoles will display the yellow light as a result of a faulty power supply. If the power supply is faulty, then it will need to be replaced.

Can you sync PS3 controller without cable?

Connecting Wirelessly to PS3 Console As long as the controller’s battery is charged, it can be connected by simply pressing the PlayStation button and waiting. The four LEDs at the top – generally used to designate controller number – will blink briefly as the DualShock 3 searches for nearby devices it can connect to.

Can I use Bluetooth dongle on PS3?

To use your PS3 controller wirelessly, you’ll either need a PC with built-in Bluetooth compatibility or a Bluetooth dongle plugged in. You must plug in the controller before you can play wirelessly.

How many Bluetooth devices can connect to a PS3?

See: Wifi The Bluetooth in the PS3 supports a maximum of eight devices concurrently. With the PS3 console using up one master slot, it leaves seven empty slots for connecting with Bluetooth devices (like Sixaxis and Dualshock3 controllers).

How do I remove the Wi-Fi/Bluetooth board from my PS3?

Remove the four 9 mm Phillips screws securing the Wi-Fi/Bluetooth board to the chassis. Remove the Wi-Fi/Bluetooth board from the PS3, minding any cables that may get caught. Almost done! To reassemble your device, follow these instructions in reverse order.

What are the components of a Bluetooth circuit board?

A Bluetooth circuit board also contains a minimum of 2 inductors, which can fine-tune the antenna’s impedance to improve the reception and sending of information. The modules have 4 IO pins: the State, Enabled, communication, and power supply options.

How do I register a Bluetooth® device to my PS3™ system?

If you have not registered any Bluetooth® devices, you will be asked if you want to register the device. Select [Yes] to continue. 5. Select [Start Scanning]. Your PS3™ system will display a list of Bluetooth® devices within range of the system. 6. Select the device that you want to register, or pair, with your PS3™ system.