Advice

How do I Reset my iLO connection?

Posted on by author

How do I Reset my iLO connection?

Method 1

  1. Open the iLO web interface.
  2. Enter iLO login-name and Password.
  3. Click Diagnostics from the left menu.
  4. Click the Reset button.
  5. Click OK button in response to “Are you sure you want to reset iLO 2” message.
  6. It may take 30-60 seconds for the iLO to reboot.

What happens when you Reset iLO?

Using the Reset option does not make any configuration changes, but ends all active connections to the iLO firmware. If a firmware file upload is in progress, it is terminated. If a firmware flash is in progress, user cannot reset iLO until the process is finished.

How do I Reset my iLO 4?

From the System Utilities screen, select System Configuration > iLO 4 Configuration Utility > Set to factory defaults, and press Enter. The iLO 4 Configuration Utility prompts you to select YES or NO. Select YES, and press Enter.

How do I Reset my iLO 4 password?

Answer

  1. Reboot the host.
  2. Watch the console closely while the host is rebooting. Press F8 when prompted to enter the iLo menu.
  3. On the iLo menu, select User.
  4. Select Edit for Administrator user.
  5. Make sure that all the other options for Administrator are set to Yes.
  6. On the iLo menu, select File.
  7. Select Exit.

How do I turn on my iLO 4 server?

Power down the server

  1. Press and release the Power On/Standby button.
  2. Press and hold the Power On/Standby button for more than 4 seconds to force the server to enter standby mode.
  3. Use a virtual power button selection through HP iLO.

How do I turn off iLO 4 server?

To power down the server, use one of the following methods:

  1. Press and release the Power On/Standby button.
  2. Press and hold the Power On/Standby button for more than 4 seconds to force the server to enter standby mode.
  3. Use a virtual power button selection through HP iLO.

How do I reset my HP Proliant server to factory settings?

From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Default Options > Restore Default Manufacturing Settings and press Enter. Select a setting and press Enter. No, cancel the restore procedure. Yes, restore the default settings.

How do I reset my iLO password without rebooting the server?

How to: Reset HP iLO 2 Password without Server reboot

  1. Install SNMP (prerequisite for HP Insight Management Agents)
  2. Download and Install HP Insight Management Agents.
  3. Download and Install HP Lights-Out Online Configuration Utility.
  4. Step 4: Note.
  5. Download HP Lights-Out XML Scripting Sample for Windows.
  6. Step 6: Note.

What is the default username and password for HP iLO?

From my experience with the G5 series, the iLO2 username is always “Administrator” and the password is always set to a random 8 digit alphanumeric string (and the default DNS name for the iLO2 device is always “ILO” followed by the serial number for the server) which is documented on a cardboard tag attached to the …

How do I Reset my iLO password without rebooting the server?