How do you reset the tire pressure sensor on a GM?

Turn your vehicle’s key to the “On” position without starting the vehicle. Push the TPMS reset button until the tire pressure light flashes three times, then let go. Start the car and wait for about 20 minutes for the tire pressure sensor to refresh.

How do you reset the tire pressure monitoring system?

With the vehicle off, turn the key to the “on” position, but don’t start the car. Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait 20 minutes for the sensor to refresh. The TPMS reset button is usually located beneath the steering wheel.

How do you reset the TPMS on a 2020 GMC Sierra?

Turn vehicle to ON/RUN. Scroll to the uplevel on the right side of the steering wheel until Tire Pressure is displayed. Push and hold Set/Reset button.

How do I Relear my TPMS on a GMC Sierra?

Starting with the vehicle off, turn your key to the “On” position, but don’t start the vehicle. Find the TPMS reset button (check your manual if you need help), and hold it until the tire pressure light blinks three times. Then, start the car and wait 20 minutes for the tire pressure light to reset.

How do you reset the TPMS on a 2018 GMC Sierra?

2015-2018 Models

1. Press and hold the TRIP knob until the horn sounds twice.
2. Start from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, near the valve stem.
3. A horn chirp will confirm that the sensor has been reset.

How do you reset the TPMS on a 2021 Sierra?

With Steering Control

1. Select INFO.
2. Scroll down to the TIRE PRESSURE menu.
3. Press and hold the ✓ button to enter the relearn mode.
4. Start from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, near the valve stem.
5. A horn chirp will confirm that the sensor has been reset.