How do I access my TRENDnet router?

How do I access my TRENDnet router?

TRENDnet. Step 1 Log into the Router by entering its IP address into a browser. The default IP address is At the login, enter your username (admin) and password (admin).

How do I use TRENDnet Ethernet?

Set up the Trendnet Switch

  1. Connect the Trendnet switch to a power outlet using the included power cord.
  2. Use an Ethernet cable to connect the Trendnet switch to a LAN or numbered port on your router.
  3. Use Ethernet cables to connect the Receipt printer, Label printer, and Integrated Scale to the Trendnet Switch.

What is the TRENDnet router default login?

The default User Name and password are both admin. TRENDnet recommends changing the default Administrator and User passwords. To change the default passwords log in to the TEW-712BR by entering into the address line of your browser.

What is TRENDnet Router IP?

The majority of the TRENDnet routers use as the default IP address.

How do you find a Router’s IP address?

Find Your Router IP Address on Android

  1. Go to Settings.
  2. Tap Wi-Fi Settings.
  3. Tap and hold on your connected network and select Manage Network Settings.
  4. Check the box next to Show Advanced Options.
  5. Select Static under IP Settings.
  6. Your router IP address is listed under the Gateway section.

What is TRENDnet used for?

TRENDnet is a global provider of award-winning networking and surveillance solutions to small and medium-sized businesses, as well as home office users. Our vision is to build innovative, easy-to-use, and reliable Networks People Trust™.

How do I reset my TRENDnet wifi extender?

Reset Button — Resets your repeater. Push and hold this button for 5 seconds with a pin or paper clip to reset configuration to factory default. WPS (Wi-Fi Protected Setup) Button + LED Indicator — Push and release the WPS button to activate WPS copying wireless settings from your router.

How do you reset a TRENDnet switch?

Press on the reset button using a pen or paperclip for 10 seconds. The default password is admin. When I connect a computer to the Switch’s gigabit port, the LINK/ACT LED turns on, but the 100Mbps LED remains off.

How do I reset my TRENDnet Router?

TRENDnet. How do I reset the router to factory default settings? Press and hold in the reset button on the back of the Router for approximately 15 seconds while the power is on.