How long does it take for NTP to synchronize?

about five minutes
Usually it takes about five minutes (five good samples) until a NTP server is accepted as synchronization source. Interestingly, this is also true for local reference clocks that have no delay at all by definition.

How do I force a time sync in Windows server 2016?

Alternate method for synchronizing your computer’s clock to IU’s time server

1. Navigate to an elevated command prompt.
2. At the command prompt, enter: w32TM /config /syncfromflags:manual /manualpeerlist:ntp.indiana.edu.
3. Enter: w32tm /config /update.
4. Enter: w32tm /resync.
5. At the command prompt, enter exit to return to Windows.

How do I force NTP to sync Windows 10?

How to force clock sync on Windows

1. Open Settings > Time & Language > Date & Time.
2. Under Synchronize your time, tap on sync now. This option forces your PC to sync with the time server.

How do I force Windows 10 to synch with a time server?

How do I fix NTP synchronized number?

Resolution

1. Edit the ntpd configuration file and remove the -x option. # vi /etc/sysconfig/ntpd.
2. Restart the ntpd.service. # systemctl restart ntpd.service.

How do I force Windows 10 to sync with a time server?

Method 2:

1. a. Click on clock and select “Change date and time settings”.
2. b. Click on the “Internet Time” tab.
3. c. Check if it is set to “synchronize the time with time.windows.com”
4. d. If the option is selected, click on change settings to check the option “Synchronize with an Internet Time server”
5. e. Click on OK.

How do I force windows 10 to sync with a time server?

How do I make my NTP synchronized yes?

The timedatectl command can also be used to enable and disable NTP with set-ntp, it will enable or disable either chronyd or ntpd depending on the service that is in use. In the example below we disable NTP and then enable it again which also triggers it to synchronize with the NTP servers.