Tips

How do you perform the maintenance on HP LaserJet 4250?

Posted on by author

How do you perform the maintenance on HP LaserJet 4250?

HP 4250 Maintenance Kit Reset Procedure Print

  1. Turn the printer off and then on. When 000MB (the. beginning of the memory-count) appears on the. control-panel display, press and hold down. SELECT button ().
  2. Release and press UP ARROW BUTTON ( ) to. scroll to NEW MAINTENANCE KIT.
  3. Press SELECT button () to reset the.

How do I clean my HP LaserJet 4250 printer?

Clean the paper path

  1. Make sure that the product is idle and the ready light is on.
  2. Load paper in the input tray.
  3. Open the printer Properties.
  4. Click the Device Settings tab.
  5. In the Cleaning Page area, click the Start button to process the cleaning page.

How old is the HP 4250 printer?

Bought this product when it was originally introduced in 2002. It finally wore itself out after heavy daily use! Ordered a refurbished 4250. It’s just a workhorse that’s made to last.

What printer replaced the HP 4250?

M608
To answer your question directly the M608 is the current direct replacement for the 4250. Like the 4250 it will take a high yield cartridge and provides flexible options for additional trays and other accessories, while providing security for your data that older printers do not.

How do you reset the maintenance light on a HP Officejet 4250?

Reset the maintenance count on an HP LaserJet 4200, 4300, 4250, 4350

  1. Turn the printer off.
  2. Turn the printer back on and, as the memory begins counting, press & hold down the checkmark button while the memory is counting.
  3. Continue to hold down the checkmark button until all three LEDs are illuminated.

How do you reset the maintenance kit on a printer?

After installing a maintenance kit, reset the maintenance count to zero by: 1….

  1. Turn the printer off.
  2. Hold down the Item key (minus side of the button) and Value key (minus side).
  3. Turn the printer on.
  4. Wait for RESET MAINTENANCE COUNT to be displayed and then release both keys.

How do I do a self clean on my HP printer?

Click Settings ( ), and then click Printer Toolbox. The printer Toolbox opens. Click the Device Services tab, and then click Clean Printheads. Click Clean to begin the cleaning process, and then follow the on-screen instructions to complete the process.

How do I clean the drum on my HP laser printer?

Here’s what the drum looks like:

  1. Step 1: Switch Off, Cool Down.
  2. Step 2: Removing and Cleaning the Toner Cartridge.
  3. Step 3: Remove Excess Toner from Internal Components.
  4. Step 4: Swab Surfaces with Isopropyl Alcohol.
  5. Step 5: Reassemble.

How do I print a configuration page on a HP LaserJet 4250?

HP LaserJet 4240 series (includes 4250 / 4350 models): Use Up button or Down button to scroll to INFORMATION, and then press Select/Go button. Use Up button or Down button to scroll to PRINT CONFIGURATION, and then press Select/Go button.

How do I reset my HP 4200 printer?

To Perform a Cold Reset via Control Panel:

  1. Turn the printer off…
  2. Hold down √ (SELECT button), and then turn the printer power on.
  3. Continue holding down √ key until all three LED lights remain lit.
  4. Release √ key.

How do I reset my HP maintenance kit?

HP LaserJet M600, M601, M602, M603 Reset the maintenance count instructions

  1. Press the Home button on the printer’s control panel.
  2. Open the “Administration” menu.
  3. Select “Manage Supplies”.
  4. Select “Reset Supplies”.
  5. Select “New Maintenance Kit”.
  6. Select “Yes” to reset the maintenance kit counter.

How do you perform printer maintenance?

Printer Maintenance 101

  1. Step 1: Run A Nozzle Check.
  2. Step 2: Clean Your Print Heads.
  3. Step 3: Align Your Print Heads.
  4. Step 4: Unplug Your Printer.
  5. Step 5: Clean The Inside.
  6. Step 6: Beware The Vacuum.
  7. Step 7: Clean Your Print Heads (Again)
  8. Step 8: Clean The Paper Feeder Rollers.