How do I download ViewSonic monitor drivers?

Installing Display Drivers

1. Enter the Product Name.
2. Select the driver based on the operating system of your computer.
3. Click on Open to start the installation.
4. Note: The downloaded file is a zipped file.
5. Once you have decompressed (unzipped) the file, double click on it and follow the prompts that appear on your screen.

Do ViewSonic monitors need drivers?

ViewSonic plug and play monitors do not require a proprietary Windows 10 driver to be installed. Instead, Windows 10 will automatically read the EDID information stored in the monitor and install Generic PNP Monitor drivers to enable its full resolution capabilities.

How do I setup my ViewSonic monitor?

1. HDMI. Connect one end of an HDMI cable to the HDMI port of your monitor.
2. DisplayPort. Connect one end of a DisplayPort cable to the DisplayPort port.
3. USB. Connect one end of a USB cable to a USB port of the monitor.
4. Audio. Plug the audio jack of the ear-/headphones into the Audio Out port of the monitor.
5. Ethernet.

How do I connect my ViewSonic monitor to my laptop?

Connect the adapter to the end of the cable from the Viewsonic monitor; then, connect the adapter to your laptop’s external video port. If your laptop and monitor have the same video connector type, no adapter is required – you can connect the monitor cable directly to the external video port on the laptop.

How do I update ViewSonic monitor?

To update the firmware, do the following:

1. Click on the Advanced sub-menu, then Information.
2. Connect the USB Type-B male cable (square with 2 cut corners) to the USB Type-B port of your monitor.
3. Click Update to upgrade your monitor’s firmware, and wait until the upgrade process completes.

How do I check my ViewSonic monitor?

Plug the computer in, reinstall the battery and connect the Viewsonic monitor. Press the power button and see if the monitor is recognized when the computer restarts.

Do I need to install a driver for my monitor?

Plug and play monitors usually do not need a separate monitor driver. However, if a monitor driver or . INF file is available, installing it adds support for display resolutions, refresh rates, or color quality. Your computer manufacturer or monitor manufacturer might recommend installing a monitor driver or INF file.

How do I install a monitor driver?

Download the attached ZIP file including monitor drivers to your PC and extract it.

1. Under “Control Panel”, open “Device Manager”.
2. Find the Monitor which you want to install/update the driver under “Device Manager” and double click the icon.
3. Go to the “Driver” tag and click the “Update Driver” button.

Why won’t my ViewSonic monitor connect?

The wire connection might just be loose, which is why the monitor doesn’t display anything. In addition, make sure that the monitor is plugged to a wall outlet and is receiving power. While you’re at it, you can try switching out the DVI or HDMI cable because the problem might be due to a bad cable.

Why is my ViewSonic monitor showing no signal?

“No Signal” indicates that the display (monitor, projector, etc) is not detecting a signal on the selected input source. Most ViewSonic Displays and Projectors will automatically detect a signal on a video input. However, some models may not have the auto-detection feature or may have it disabled.

How do I update my monitor drivers?

Update the device driver

1. In the search box on the taskbar, enter device manager, then select Device Manager.
2. Select a category to see names of devices, then right-click (or press and hold) the one you’d like to update.
3. Select Search automatically for updated driver software.
4. Select Update Driver.