How do you use Vivitar wireless earbuds?
How do you use Vivitar wireless earbuds?
Pairing Your Earphones with a Smartphone Go to the Bluetooth settings menu on your phone. Make sure that Bluetooth is turned on. Connect to the device listed as “Vivitar V40038BT.” 2. The LED indicator lights will alternately flash red and blue to indicate that your earphones are in pairing mode.
How do I connect my Vivitar Bluetooth headphones?
Tap Connected devices. Tap Pair new device. Your headphones should be in pairing mode (see the owner’s manual for instructions on how to do this). The headphones can be found under Android Central’s list of available devices.
How do you know when Vivitar headphones are charged?
NOTE: The internal battery of your headphones takes approximately two hours to charge when completely drained. 2. When the battery is charging, the LED indicator light will turn red. The LED indicator light will turn off when the battery is fully charged.
How long does it take for Vivitar earbuds to charge?
The LED indicator light will turn blue when the battery is fully charged. Unplug when charging is complete. VF50012BT Bluetooth Headphones Specifications Pairing Your Headphones NOTE: The internal battery of your headphones takes approximately 2 hours to charge when completely drained.
Why is only one of my wireless earphones working?
Headsets may play only in one ear depending on your audio settings. So check your audio properties and make sure that the mono option is turned off. In addition, make sure that voice levels are balanced on both earbuds.
How long does it take to charge Vivitar Bluetooth headphones?
How Long Should I Charge My New Bluetooth Headset?
| Product | Approximate Charge Time | Indicator Light on Full Charge Goes from… |
|---|---|---|
| M1100 | 2 hours | Solid red to off |
| M1000, M1500 | 2 hours | Flashing blue to off |
How do you charge Vivitar wireless headphones?
Charging. Insert the included cable’s Micro USB plug into the charging port on the headphones. Insert the standard USB plug into the USB port of a computer or suitable USB charging adapter. The LED Indicator will turn red while the headphones are charging and turn blue when charging is complete.
How do you sync left and right earbuds?
- Step 1: From off status, press and hold the power button for about 15 seconds on both earbuds until the LED flashes BLUE.
- Step 2: Once connected, the LED on the left earbud will flash BLUE twice every 5s and the LED on the right earbud will alternate between flashing BLUE & RED indicating that it is in pairing mode.
Why is my Bluetooth headphones flashing red and blue?
They are in pairing or discovery mode. This means your headphones are looking for another Bluetooth device to connect with. Sometimes, headphones in pairing mode are trying but failing to connect with another device. They’re running into an error during pairing, so they blink red and blue to let you know.
How do you pair wireless earbuds to each other?
Take out both earbuds from the charging case at the same time and wait for a few seconds for both of them to turn on and connect to each other. However, if they don’t pair to each other automatically, put them back in the charging case and repeat the process of removing them simultaneously.
How do you get both wireless earbuds to work at the same time?
What you do is double click each earbud at the same time make sure your phone is turned off bluetooth and they should pair wait a couple of sec and then turn your bluetooth on.
Why can’t I hear out of both earbuds?
There can be many reasons that a pair of headphones only play audio out of one ear. The most common reason for sound to only come out of one side is the wires near the audio jack have gotten bent back and forth so many times that it has caused a short in the wiring.
Why are my headphones blinking red while charging?
If your headphones are flashing red or amber, it usually means the battery is running low. An orange light may mean the battery is at a medium level and you need to charge the headphones in a few hours. It may also mean that the headphones are currently charging.
Why is my wireless earphones not turning on?
If the power on the headphones is not turning on, the battery may not be inserted correctly or the battery may need to be replaced. Check the following items to troubleshoot this issue. IMPORTANT: If model-specific information is needed to complete any of the steps, refer to the instructions supplied with the product.