How do I stop my Yale alarm from beeping every 30 seconds?

How do I stop my Yale alarm from beeping every 30 seconds?

Yes, you will need to go into the programme menu, advanced settings, scroll to warning beep and press the tick key, scroll to warning beep off and press the tick key.

How do I silence my Yale alarm?

How do I disarm my system?

  1. On the Key Pad: Press Disarm followed by your PIN code.
  2. On the Key Fob: Press Disarm. (The siren will beep twice and flash.)
  3. On the Control panel, Light panel up, green disarm key, enter pin code, tick.

How do I reset my Yale intruder alarm?

To Reset After an Alarm:

  1. Keep pressing Command button until the keypad displays Arm Disarm.
  2. Press the blank button under Disarm.
  3. Enter your security code and press Command.
  4. Select Yes to automatically disarm all the areas authorized for your security code.

How do I connect my Yale Smart Hub to WIFI?

To connect to a different Wi-Fi network, press the Reset button for 10 seconds to reset the camera then reconnect to Wi-Fi when the red and blue light flashes. Enter the App, go to the camera preview page, click the gear icon in the top right corner, then click on “Wi-Fi” and follow the prompts.

How do I pair my Yale siren?

Press and hold the learn button on the hub until the LED flashes. Make sure dip switches 1 2 3 and 4 on siren are on OFF position , then turn the power switch ON and press the learn button for 1 second. Go back to the hub and press the learn button for 1 second. Go to the siren and press the learn button for 1 second.

Why does my Yale house alarm keep beeping?

Siren batteries should be refreshed every 2-3 years. The unit will’ beep’ five times when arming the system to inform you that the battery power is too low. It is required to disable the siren tamper when swapping out batteries.

Why does my Yale smart alarm keep beeping?

My Smart Hub is beeping every 30 seconds and also has an Orange light illuminated. This means there has been an alarm activation, or there is a fault in the system. Please fully arm the system, then disarm. If the fault light is still on please go into the app and check if there are any faults with any of the devices.

Why does my Yale house alarm keep going off?

The siren tamper may not be fully depressed. Please check that the siren tamper switch/spring is depressed to its fullest. Some packing may be required if the siren is mounted on an uneven surface.

Why does my Yale alarm keep beeping?

This means there has been an alarm activation, or there is a fault in the system. Please fully arm the system, then disarm. If the fault light is still on please go into the app and check if there are any faults with any of the devices.