How do you tell which BorgWarner turbo I have?

How do you tell which BorgWarner turbo I have?

The nameplate is fitted to the compressor housing of your turbocharger. The information on this nameplate must be quoted for service and parts support.

Do turbos have different sizes?

Single turbochargers are what most people think of as turbos. By differing the size of the elements within the turbo, completely different torque characteristics can be achieved. Large turbos provide higher levels of top end power, whilst smaller turbos can spool faster and provide better low-end power.

What does the AR number on a turbo mean?

What is A/R? A/R stands for Area over Radius. It is defined as the inlet (or, for compressor housings, the discharge) cross-sectional area divided by the radius from the turbo centerline to the centroid of that area.

What do the numbers mean on a turbo size?

Using Precision Turbo’s ‘chargers as examples, the numbers represent the diameters of the inducer and exducer on the compressor and turbine wheels (measured in millimeters, from tip to tip of the blades on each wheel). With a 62/66, the first two digits are the compressor wheel size (62mm).

How can I tell which turbo I have?

The turbo part number can usually be found stamped or etched into the compressor housing of the turbocharger. Other numbers will be visible on the ID plate. These will be Vehicle manufacturer part numbers and build serial numbers.

How do I know what turbo my car has?

All turbochargers should have an identification label or nameplate secured to the outside casing of the turbocharger. It is preferable if you can supply us with this make and part number of the actual turbo fitted to your car. Normally, you can identify the turbocharger by Model Name, Part Number and OEM number.

Can you run 2 different size turbos?

Sequential twin-turbos This setup uses two different sizes of turbochargers; a small-vaned turbo for low exhaust gas flow at lower engine speeds and then a much larger second turbo to take over once it’s had a chance to spool up.

What size is a gt45 turbo?

Compressor Size ——-
* Trim: 50
* Inducer Diameter: 69mm
* Exducer Diameter: 98 mm
* A/R 0.66

How do you know what size turbo to get?

The calculation is simple: Divide the absolute outlet pressure that you think you want (14.7 + boost pressure) by the absolute inlet pressure that the Earth says you can have (14.7) and you’ve got your pressure ratio. Limiting yourself to a reasonable number is the hardest part.

Can you put any turbo on any car?

In short, although you can theoretically add a turbocharger to almost any naturally-aspirated engine, it’s not a plug-and-play process. There are a lot of parts that require careful consideration. Luckily, some tuning companies have taken some of the guesswork out of the process.

How do I know what size turbo to get?

In order to decide on the appropriate turbocharger for your diesel engine, the very first thing that needs to be established is the power target. Since turbochargers are sized by how much air they can deliver and airflow is proportional to engine power, a realistic horsepower goal is critical to make the right choice.

Is Twin Turbo better than single?

A twin-turbo setup also provides for the reduction of the lag. It helps produce power faster using 4 cylinders, while a single turbo requires all 8 cylinders for an optimal boost. This type of engine is excellent for regular driving in a city or a normal regime. Twin-turbo takes care of smooth engine functioning.

How much HP does a twin turbo add?

How Much Horsepower Does a Twin-Turbo Add? A twin-turbo can add anywhere from 100 to 250 horsepower to your engine. This is a great way to really boost your engine’s power and help you achieve some impressive speeds. A twin-turbo can also be great for your fuel economy and help you get the most out of your engine.

What happens if turbo is too small?

The turbocharger is too small. It cannot move enough air to creat much more power than you are already making. Boost pressure is merely a byproduct of forcing air into the engine. The engine acts like a big restriction in a pipe, the more fluid you force through it, the higher the pressure differential.

What is the smallest T3 turbo?

This turbocharger features a T3 Super 60 Trim compressor. The T3 is the smallest family of turbochargers that Turbonetics offers. Perfectly sized for applications under 2 liters, the T3 line-up starts with the 150 HP 35 trim wheel and goes up to the 325 HP Super 60.

What size is a HX35 turbo?

Holset HX35 Turbochargers

Holset HX35 Turbocharger Specs
DIMENSIONS:
Length (mm) 224
Width (mm) 250
Height (mm) 169