Why is my VTech cordless phone not working?

If your telephone is not operating normally, disconnect the battery(s) from the handset and disconnect power from the base. After a few minutes, connect power to the base, install the battery(s) and cradle the handset in the base to allow it to establish a link. You can now try using your phone again.

How do you reset a VTech cordless phone?

How to Reset a Vtech Cordless Phone

1. Unplug the power cable from the base of the Vtech.
2. Reconnect the power cable to the base after a few minutes.
3. Reinsert the battery into the handset.
4. Put the handset in the handset cradle of the base. This will allow the devices to re-establish a link.

How do I turn the ringer back on my VTech phone?

Press MENU/SELECT when the handset is not in use. Press CID or until the screen displays Ringers, then press MENU/SELECT. Press CID or until the screen displays Ringer tone, then press MENU/SELECT.

Why is my VTech phone not ringing?

If the phone does not ring at all, you may have the ringer turned off. The handset and base have independent ringer programming. Step 2: Press ▲DIR or ▼CID to display >Ringers, then press MENU/SELECT. Step 3: >Ringer volume is displayed.

Why does my VTech phone have no dial tone?

A common issue users have when they do not hear a dial tone is that all the wires of the device are not actually plugged in. Fasten the phone cable into both the wall and the phone base. If the issue is still not resolved, then consider trying to connect a different, functional, telephone into the same cables.

Why is my cordless phone not ringing?

There are some common and easy-to-fix problems you can check: Check your ringer — has it been turned off? Change the batteries on your cordless phone. If you are a Pure Broadband customer and only have our internet service, then you may have a dial tone, but you do not have true telephone service.

How do I take my VTech phone off silent mode?

A: To turn the Silent Mode OFF and for your handset to ring, press and hold the # key on your handset for about 10 seconds. Your handset will beep and this will indicate that the Silent Mode has been turned OFF.

Why can’t I call out on my VTech phone?

Why is my phone not ringing on incoming calls?

There are various reasons why your Android phone won’t ring when someone calls, including: Your ringer volume is turned down. Your phone is on Do Not Disturb or Airplane mode. You turned on call forwarding.

How do I troubleshoot my no dial tone?

If you can’t hear any dial tone, check your cable wire connection up to telephone line socket and make sure there are no loose connections. Also ensure that the line cord is properly connected to your handset. If your phone has a dial tone, try checking the ringer volume.