Tips

Can we create mirrored logical volume?

Posted on by author

Can we create mirrored logical volume?

With LVM, you can create mirrored logical volumes with multiple mirrors. An LVM mirror divides the device being copied into regions that are typically 512KB in size. LVM maintains a small log which it uses to keep track of which regions are in sync with the mirror or mirrors.

How do I create a mirrored logical volume in Linux?

  1. Step 1: Check for Present Drives.
  2. Step 2: Check for Newly added Drive.
  3. Step 3: Check Present Logical and Physical Volume.
  4. Step 4: Create New Physical Volume.
  5. Step 5: LVM Mirroring Method.
  6. Step 6: LVM pvmove Mirroring Method.

How do you convert linear volume to mirror volume?

The following command converts the linear logical volume vg00/lvol1 to a mirrored logical volume.

  1. # lvconvert -m1 vg00/lvol1.
  2. # lvconvert -m0 vg00/lvol1.

What is the command for LVM mirroring?

# lvcreate -L 50G -m1 -n mirrorlv vg0 An LVM mirror divides the device being copied into regions that, by default, are 512KB in size. You can use the -R argument of the lvcreate command to specify the region size in megabytes.

How do you create a mirrors logical volume?

When we create a mirrored logical volume, make use of -m argument of the lvcreate command for the number of copies of the data that needs to be created. For example Specifying -m1 creates one mirror. Which means a linear logical volume plus one more mirrored copy.

How do I transfer LVM to new storage?

How to migrate LVM to new storage

  1. Step 1:Check new device which ‘ll be used after migration.
  2. Step 2:Check LVM device which you need to migrate.
  3. Step 3:Create PV with new added LUN device.
  4. Step 4:Extend VG with new added PV.
  5. Step 5:Add new mirror device to LVM.
  6. Step 6:Remove old disk from LVM.

How do I mirror a volume group in Linux?

While creating mirrored volumes in particular volume group, you have to specify the number of copies of the data required with -m argument of the lvcreate command. For creating 1 mirror copy of data, you have to specify as -m1 . Specifying -m1 creates one mirror, which yields two copies of the file system.

How do I mirror a disk in Linux?

Mirroring in Linux

  1. # sudo apt-get install mdadm.
  2. Partition the disk. fdisk -l.
  3. creating RAID. # mdadm –create /dev/md0 –level=mirror –raid-devices=2 /dev/sdb1 /dev/sdc1.
  4. cat /proc/mdstat. Personalities : [raid1]
  5. Create file system on the RAID.
  6. sudo mkdir /data (creating directory so that we can mount our drive here)

How do I clone a LVM partition?

Attach the original drive + a new drive to be used for copying the data. Shrink the logical volume on the original drive. Create the same partitions & volumes on the new drive. Use dd to copy the logical volumes to the equivalent logical volumes on the new drive.

What is mirroring in Linux?

In Linux, a mirror is a copy of programs available for download. If you are close ( in networking terms, maybe or maybe not geographically ) to one of the mirror sites listed, you might choose the mirror site as your main source of downloads so you get better response times.

How do I transfer LVM to new drive?