How do I reset my Videotron TV?

Electrical restarting of terminal

1. Unplug your terminal’s power cable.
2. Wait 10 seconds and plug it back in.
3. Wait 5 minutes or until the time reappears on the front panel.
4. Turn the terminal back on.

Why Helix is not working?

Check that you’ve enabled Wi-Fi access on your device. Check that you’ve properly connected your device to your home network, instead of to a public Wi-Fi network or to another wireless network. 3. Restart your device, open the Helix TV app and check if you are connected to your home network.

How do I reset my Videotron box?

To reboot the Terminal, unplug the power supply cord, then plug it back in again a few seconds later. Wait a few minutes before turning the Terminal back on. If the problem persists, please contact Technical Support at 1-877-380-2611.

How do I reset my Videotron Helix?

Press the A and D buttons simultaneously for 5 seconds, until the indicator light goes from red to green. Press 9, 8, and 1 on the keypad at the bottom of the remote. The indicator light will flash 3 times to confirm the remote has been reset.

How do I reset my Videotron remote?

Press and hold MUTE and OK keys until the mode key blinks twice. Step 2: Enter 9-9-3 using the digit keys on the remote.

What is Helix Fi gateway?

The Helix Fi gateway is an all-in-one product that combines the functions of a modem and a router. It allows you to connect all your wireless devices to the Wi-Fi network at home.

Why is my Helix box flashing orange?

Orange (1 blink pattern per second) Downstream synchronization.

How do you program URC remote?

Additional Programming Information

1. Turn on the TV.
2. Press and hold SETUP until the LED on the remote blinks twice.
3. Press the POWER key; LED should remain on.
4. Press and hold the digit key associated with your TV brand: 1 – Insignia / Dynex. 2 – LG / Zenith.
5. Let go of the key when the TV turns off. Setup is complete.

Is Helix a router or modem?

Helix Fi Gateway All-in-one modem and router, it connects all your household’s wireless devices to an ultrafast, high-performance Wi-Fi signal.

How do I update my Helix modem?

Select your Helix from the Line 6 Updater window and then click the newest firmware’s Update button to start the update. Follow the on-screen instructions and wait for the firmware update to complete (about 5 minutes). When the update completes, Helix will restart and rebuild its presets (about 2 minutes).