How do you clean an evaporative cooler?

How do you clean an evaporative cooler?

How to Clean Portable Evaporative Cooler

  1. Step1 : Remove panels and cooling pads. Unplug the cooler and turn off the water.
  2. Step2: Drain water out of the air cooler.
  3. Step3: Brush out the inside of the cooler.
  4. Step 4: Soak the water tank with vinegar.
  5. Step 5: Scrub the water tank.

How often should you clean evaporative cooler?

STEP #3: Check And Clean The Cooling Pads No matter what type of evap cooling pads your system has, it is important to clean them at least once a month. Clean the evap cooler pads at least once a month. If you don’t clean them more often, they can cause bad smells.

Do you need to clean evaporative cooler?

An Evaporative Cooler requires regular cleans to remove any build-up of contaminants impeding the operating performance of the system and contaminating the air we breathe.

Can I run vinegar through my swamp cooler?

Clean. Add a cup of vinegar to the cooler pan and let the vinegar cycle through the system for up to an hour. This will eliminate odors, mold, mildew and some corrosion, calcium deposits and other types of build-up.

How often should evaporative cooler pads be changed?

2-3 years
Generally, it is recommended to clean the pads at least once every year or twice a year (before and after use) and replace them after 2-3 years.

How much does it cost to clean evaporative cooler?

In most instances, the service cost starts at $150 to as high as $300. However, services that do not require replacement of parts typically cost around $100 to $150.

How long should EVAP last?

If proper maintenance is regularly performed, then the evaporator coils should last 10 to 15 years, which is the ideal lifetime for an evaporator coil and comparable to the lifespan of an AC unit.

How do I get rid of mold in my evaporative cooler?

Some folk recommend a half-and-half compound. The first half of the mix is clean water. As for the second, lemon juice or citric acid are both excellent mould killers. Clean and dry the tank with this cleansing agent.

Does evaporative cooling cause mold?

Homeowners are often concerned that their evaporative coolers may cause problems with mold or mildew. Fortunately, there are many steps that you can take to ensure that this does not occur. Evaporative coolers do not cause mold or mildew to grow when they are used correctly.

Should I put bleach in my swamp cooler?

Bleach is one of the most common household cleaning chemicals, but it is not a good choice for your swamp cooler. Bleach should never be used in an evaporative cooler as it can damage the pans and possibly void your warranty. We recommend a cleaning solution made from a mix of vinegar and water.

How do I get rid of algae in my swamp cooler?

  1. Rinse out the water cooler with a hose. Use the nozzle on the hose to spray off loose algae.
  2. Pour bleach inside the cooler.
  3. Put on gloves.
  4. Dip the scrub brush into the bleach and scrub the algae.
  5. Wipe down the sides with a sponge and bleach.
  6. Dump out the bleach.
  7. Rinse out the cooler.