How do I set my AirPort Time Capsule to bridge mode?

In Airport utility:

Wireless Tab –> Network Mode –> Off.
Network Tab –> Router Mode — Off (Bridge Mode)
Internet Tab –> Connect Using –> DHCP.

How do you set bridging mode?

How to Set Up Bridge Mode

Open a web browser from the device that’s connected to the network of the router that will run in bridge mode.
On the login screen, enter the router’s username and password.
Head over to Settings > Advanced Settings > Advanced Setup > Wireless Bridge.
Click the Enable Bridge Mode checkbox.

Can I connect Time Capsule to router?

Connecting your Mac to the third-party Time Capsule. Once you have prepped the router to work as a Time Capsule, it’s time to make your Mac use it. In the role of a server, you can connect to a router by using its IP address.

How do I use Time Capsule with existing wireless network?

Plug the ethernet cable into the back of the Time Capsule. Plug the other end into the DSL or cable modem provided by your Internet Service Provider. This connects the Time Capsule directly to your Internet connection and allows the Time Capsule to share your Internet connection wirelessly with your devices.

What is bridge mode on AirPort?

In bridge mode, the base station connects to a router and acts as a dynamic host configuration protocol and network address translation server, extending the range of the existing network to other devices in the building. Connect the Apple AirPort Express base station to another network via the AirPort Utility.

Can I use Time Capsule to extend my wireless network?

To extend a wireless network, your Time Capsule must be within adequate reach of your current wireless router. The Time Capsule takes the signal that it receives from your router, and rebroadcasts at the same strength.

What does Enabling bridge mode do?

Bridge mode is a networking feature that allows two routers together. When it enabled, it essentially turns the respective router into a switch. The bridge-enabled router will still transfer data, but it won’t perform traditional Network Access Translation (NAT) processes.

Can I connect my Apple Time Capsule directly to my Mac?

Fortunately, your MacBook Air has a Thunderbolt port and Apple does offer a Thunderbolt to Ethernet Adapter, so you can establish a wired Ethernet cable connection from your Mac to one of the LAN <–> Ethernet ports on the Time Capsule.

What is the purpose of bridge mode?

Bridge mode is the configuration that disables the NAT feature on the modem and allows a router to function as a DHCP server without an IP Address conflict.

How do I setup my Time Capsule as an external hard drive?

1 Open AirPort Utility, located in the Utilities folder in the Applications folder. 2 Select your Time Capsule and click Continue. available wireless devices, and then select your Time Capsule from the list. 3 Follow the onscreen instructions to set up your Time Capsule and your wireless network.

Can I use Apple Time Capsule as external hard drive?

External drive connected to an AirPort Extreme Base Station (802.11ac) or AirPort Time Capsule. Time Machine can back up to an external USB drive connected to an AirPort Extreme Base Station (802.11ac model) or AirPort Time Capsule. Connect the drive directly to your Mac, then use Disk Utility to erase it.