How do I fix my PNY flash drive?

Method 2. Windows Utility – Check and Fix the Error on the Damaged USB

Connect the USB to your PC.
Go to My Computer/This PC and then the USB Drive.
Right-click the USB drive and select Properties.
Click on the Tools tab.
Click the Check button.
Step 6: Let the scan process complete, then close the scan window.

Why would a flash drive suddenly stop working?

This issue usually occurs due to a disabled USB port, damaged or corrupted USB device, incorrect settings, software conflicts, or faulty or out-of-date USB controller drivers.

How do I recover data from a dead flash drive?

If your computer can recognize the dead flash drive, then you can use data recovery software like Disk Drill:

Download and install Disk Drill.
Connect your dead flash drive to your computer.
Launch Disk Drill and scan the dead flash drive.
Preview & select files for recovery.
Recover selected files to a safe location.

How do I get my flash drive to work again?

You can try any method as shown on this page in the main content to make your flash drive work again:

1). Check flash drive connection, change USB port or PC.
2). Update flash drive drivers.
3). Check and repair flash drive errors.
4). Format and reset flash drive file system.

Do USB flash drives go bad?

All USB flash drives will eventually go bad because their internal memory chips can only be used a finite number of times. However, the maximum number of read and write instances will likely never be reached on any device in normal use.

Can a dead USB drive be repaired?

When your USB flash drive, external hard drive, or SD card is not detected or recognized due to physical damage, it is almost impossible to retrieve the data. A dead USB can only be fixed by specialists or be replaced with a new one.

Can you recover files from a broken flash drive?

To retrieve files from a USB that is broken, it’s necessary to contact a repair service with specialized equipment and have them transfer the flash memory chip to a healthy donor USB flash drive.

Can you fix a broken flash drive?

For software or driver issues, you can scan and repair your flash drive using your computer’s built-in repair utility. If your drive isn’t working because of an improper formatting or corrupted data, you can reformat your drive—but keep in mind that reformatting your USB flash drive will erase all files on it.