Advice

Can I program my own Hyundai key fob?

Posted on by author

Can I program my own Hyundai key fob?

Tips. Keep in mind that the key fob programming instructions will only work if you have a key fob already programmed to a previous Hyundai that you owned. If you are purchasing a new Hyundai, you will need to visit a Hyundai service center to have an expert technician program the key fob to your vehicle instead.

How much does it cost to program a Hyundai key fob?

The caveat was that this advanced “smart” key fob needed to be programmed by a dealer or locksmith. So we brought our car to M.J. Sullivan Hyundai in New London, Conn., where we were charged $120 for programming (an hour’s worth of labor), which is the same amount they would charge if we bought the fob from them.

How do I resync my Hyundai key fob?

How to Program a Hyundai Key Fob

  1. Get inside of your Hyundai and ensure all the doors are closed.
  2. Use your key to turn your Hyundai to the “ACC” (accessory) position on your ignition.
  3. Hold the “open” or “unlock” button on the key fob until your vehicle’s light flashes.
  4. Congratulations!

How do I find my Hyundai key code?

Vehicle PIN code can be obtained through www.PATSCode.com service or through Hyundai dealer. – Key coding procedure is available in control unit IMMO – Immobilizer from “ECU Programming/Coding” menu.

Why is my Hyundai key fob not working?

If it’s not, re-open the case and double-check that the battery is in the correct position and the connections are touching and in good condition. Then, try to reprogram your Hyundai key fob. If the key fob still doesn’t work, you might need a Hyundai key fob replacement.

How do you program a Hyundai key card?

Pairing and registering the NFC Key Card

  1. Start your vehicle.
  2. Make sure you have your primary smartphone with the Hyundai Digital Key app loaded in the vehicle.
  3. In the app, select the Pair NFC Key Card via BLE section from the side menu.
  4. Place your card on the wireless changer.
  5. Pairing will occur automatically.

How do I setup my Hyundai smart key?

Hyundai Digital Key First Time Setup

  1. Navigate to the Digital Key app main menu.
  2. Start you Hyundai if it’s not already running.
  3. In the Digital Key app, press the + button to start the pairing process.
  4. Place your Android phone on the wireless charging pad.
  5. Wait for phone to finish pairing.

How do I reprogram my car key fob?

How to program a key fob

  1. Replace the batteries inside the key fobs.
  2. Get inside the car.
  3. Turn on the ignition.
  4. Press the lock button on the remote key.
  5. Listen for a Lock Sound.
  6. Programming additional remotes.
  7. Turn off the ignition.
  8. Step out from your car and test the result.

How do you reprogram a key fob?

Follow these steps to program a key fob at home:

  1. Replace the batteries inside the key fobs.
  2. Get inside the car.
  3. Turn on the ignition.
  4. Press the lock button on the remote key.
  5. Listen for a Lock Sound.
  6. Programming additional remotes.
  7. Turn off the ignition.
  8. Step out from your car and test the result.

How do you program a Hyundai key fob?

They are well familiar with the electronics of the Hyundai, and they will do it without damaging the vehicle (if some panels need to be removed and/or re-assembled). They will get inside your car, set it to “program” mode, and then synchronize the key fob with the car.

Why does my Hyundai key have to be programmed to start?

Most of Hyundai models made in the past 20 years are equipped with some sort of transponder security feature. Therefore, the key or remote will have to be programmed to start the car. By saying “programmed” it means the car’s computer must be able to recognize the key as “authorized key”.

How do I unlock a Hyundai with a keyless key?

Sit in the driver’s seat of your Hyundai vehicle. Close all of the vehicle’s doors behind you. Stick the key to your Hyundai into the vehicle’s ignition cylinder. Turn the key to the “ACC” or “Accessory” ignition position. Hold down the “Open” or “Unlock” button on the keyless entry FOB until the vehicle’s lights flash.

What kind of battery does a Hyundai key fob use?

See what kind of battery your key fob has and buy a Hyundai key fob battery replacement. Most Hyundai key fobs use a CR2032 battery. These are cheap batteries that are easy to find just about anywhere around Miami or on the internet.