What is a good autoignition temperature?

What is a good autoignition temperature?

Typical oil-based penetrant: flash point 100˚C(212˚F) auto-ignition >200˚C(>392˚F)

What is the ignition temperature for coal?

The minimum ignition temperature for coal dust layer is 155°C. It is related to the logarithm of the depth of layer, , between 2.9 and 59.0 mm. where t is in centigrade and in mm. The coal dust explosion temperature is difficult to calculate but measured values range from 2500 to 2600°C.

What is meant by autoignition temperature?

The autoignition temperature is defined as the limit temperature above which a fuel/air mixture ignites if given enough time.

What does high autoignition temperature mean?

Definition. The autoignition temperature or auto self-ignition temperature of a substance is the temperature at or above which a material will spontaneously ignite (catch fire) without an external spark or flame.

What is the difference between flash point and autoignition temperature?

While the flash point is the ambient temperature at which the chemical can spark or ignite (if it meets an ignition source), the auto-ignition temperature is the lowest ambient temperature at which the chemical will spontaneously combust (without an ignition source).

How is autoignition temperature determined?

Autoignition temperature tests are measured by placing the substance in a half-litre vessel and inside a temperature-controlled oven. As mentioned the current standard procedures for such tests are outlined in ASTM E659.

Can coal ignite itself?

Coal can ignite spontaneously when exposed to oxygen, which causes it to react and heat up when there is insufficient ventilation for cooling. Pyrite oxidation is often the cause of coal’s spontaneous ignition in old mine tailings.

What has the lowest ignition temperature?

Mustard oil has the lowest ignition temperature among the given list.

What is the difference between flashpoint and ignition point?

The key difference between flash point and auto ignition temperature is that flash point determines the lowest temperature at which vapour of a material starts ignition in the presence of an ignition source whereas auto ignition temperature is the lowest temperature at which a material can start ignition spontaneously.

Can wet coal catch fire?

Charcoal has a strong affinity for moisture, and not oxygen, at ordinary temperature. Pulverized merchant charcoal contains about 15 per cent of water, and with this amount of moisture will readily ignite a strong spark.

Why is coal self heating?

There is no moisture shoulder present due to the low moisture content of the coal. Coal L initially self-heats to a maximum temperature of 36 °C, but due to the high moisture content of the coal it begins to lose heat due to the moisture liberation and evaporation effect.

What is the ignition temperature of diesel?

Material Autoignition Temperature oF Notes
Diesel 350-625 Laboratory – ASTM
Diesel >1200 Heated catalytic converter. No ignition, test stopped at 1200 degrees F
Diesel 950-1000 Heated pipe
Diesel 1010-1125 Recessed stainless steel plate