How close can an electrical outlet be to a bathroom sink NZ?
How close can an electrical outlet be to a bathroom sink NZ?
Power-points must be a minimum of 150mm from the edge of the water container (i.e bathroom sink). However, Bluegum recommends you allow at least 300mm, just to be safe. Power-points must be a minimum height of 400mm above the top of the water container.
Can you put an electric socket in a bathroom?
Sockets are not allowed in bathrooms or shower rooms (apart from shaver-supply units) unless they can be fitted at least three metres from the bath or shower.
How close can a plug be to a sink NZ?
Electrical sockets or switches should be fitted at a safe distance (it is recommended at least 30cm horizontally) from a sink to avoid the chance of water coming into contact with electricity. » NICEIC – Your Guide to Electrical Work in the Kitchen.
How close can a light switch be to a bathroom sink?
National Electrical Code says that the receptacle must be within 3′ of the outside edge of the basin, but not more than 12″ below the top of the basin (210.52(D)). It also states that the receptacle can be installed in the countertop, but must not be in the face-up position (406.5(E)).
Can a light switch be next to a shower?
NEC Requirements The NEC requires that switches not be installed within the confines of shower and tub areas, unless as part of a shower assembly. In other words, unless the switch is already built in to your shower assembly from the manufacturer, adding a switch inside a shower is a code violation.
Can a bathroom fan and light be on the same circuit?
This is acceptable. Many bathroom fans include lights with the intention of both being wired to one switch on the same circuit. They can also be wired separately to different switches.
Do bathroom lights have to be on a separate circuit?
The bathroom electrical code now stipulates that the bathroom must have dedicated circuits that aren’t shared with outlets or lights in any other room. You must provide at least two of these circuits. One is a 20-amp circuit that powers the outlets, and the other is a 15-amp circuit for the lights.
Which regulations affect electrical installation works in a bathroom?
Electrical installations in bathrooms are highly governed by stringent regulations, known as Section 701, which was last updated in 2008. And these regulations can have some significant effects on the electrical work that can be carried out in bathrooms.
Why are electrical sockets ever rarely installed in bathrooms?
Bathrooms are considered to be a special location for electrical installations because they have an increased risk of electric shock for the users, due to being so close to water.
How far does an outlet have to be from a bathroom sink?
Outlet Receptacles When considering bathroom receptacles, keep correct placement in mind. You should keep the receptacle at least 6 feet away from the edge of a bathtub or shower and at least 1 foot away from sinks.
How far must an electrical socket be from a sink?
30cm horizontally
Electrical sockets or switches should be fitted at a safe distance (it is recommended at least 30cm horizontally) from a sink to avoid the chance of water coming into contact with electricity. Sockets should also be easily accessible.