Do downspout splash blocks work?

The splash blocks safely and reliably channel water away from your home. Their performance at diverting water away from your house can prevent foundation damage and leaks into the basement. These benefits could save you thousands of dollars in future repairs.

What is the purpose of a downspout splash block?

Splash blocks are rectangular pieces of plastic or concrete placed underneath the end of the downspout. Their purpose is to direct water as far away from your home as possible while preventing the soil from eroding and causing foundation issues.

Are gutter splash blocks necessary?

Downspouts that go into underground drains or drywells do not require splash blocks. However, any downspouts that drain above ground, especially near the building’s foundation, needs splash blocks as an added level of protection from water damage.

What is the proper way to install splash blocks?

Install splash blocks directly under each downspout in your home capable of carrying water at least 3 feet away. Always adjust them in an angle away from your home; prepare to do some digging if needed. Tip: the ideal angle is a slope of 6 inches in 10 feet.

Are splash blocks enough?

Whether you’re putting finishing touches on your home’s exterior, protecting your landscaping, or safeguarding against foundation and water issues, splash blocks are essential. When rainwater pools at your foundation, it can cause leaks, water damage, and microbial growth in your home.

What is the proper way to install a splash block?

How do you keep a plastic splash block in place?

Splash blocks must be set into the ground; avoid just placing them on top of the surface underneath the downspout. If the splash block is open at one end and closed at the other, the closed off edge should be against the exterior wall or flush with the foundation.

Which way are splash blocks supposed to face?

Which way should gutter splash guards face?

The down spout should direct water away from the foundation rather than at or along the foundation and the splash block or drain should carry water far enough away to prevent erosion at the foundation.

Which way does a splash guard go?

Installation of splash blocks can go either way. In the case of a strong positive grade away from the house, the splash blocks are installed backwards to slow down the water to prevent erosion and damage to the grass.

Which way should gutter splash guard face?

Getting Them Right The down spout should direct water away from the foundation rather than at or along the foundation and the splash block or drain should carry water far enough away to prevent erosion at the foundation.