What size spindle Nut Socket for Dana 44?
What size spindle Nut Socket for Dana 44?
Compare with similar items
| This item GEARWRENCH 1/2″ Drive 4-Lug 4WD Spindle Nut Socket 1/2 to 3/4 Ton Dana 44 – 2467 | GEARWRENCH 1/2″ Drive 6-Lug 4WD Spindle Nut Socket 3/4 to 1 Ton Dana 44 – 2770D | |
|---|---|---|
| Item Dimensions | 6.9 x 4.7 x 2.2 inches | 6.5 x 4.6 x 2.7 inches |
| Material | Chrome Vanadium Steel | Chrome Vanadium Steel |
What size axle nut is in a Dana 44?
Spindle Nut Socket for: Dana 28, Dana 30, Dana 35 and Dana 44 Font Ends, with 4-prong design spindle nuts.
What size is the axle nut socket?
Axle Nut Socket 24mm x 12 Pt.
What size is a castle nut on a trailer hub?
This a Axle Castle Nut used to secure your trailers Hub and Bearings onto your Spindle. This is 1″ – 14 thread standard castle nut that will work on nearly all trailer axles. This size and thread is very standard.
What is the spindle nut?
A spindle nut is threaded onto the spindle to affix the hub assembly onto the spindle. The spindle nut performs the critical function of retaining the hub assembly on the spindle.
What size is the spindle nut?
Spindle Nut | 615-097.1 | Spindle Nut M22-1.5 Hex Size 32mm | Dorman Products.
What size is castle nut?
Castle nut size refers to its nominal thread diameter. Typically, sizes range from about 1/4″ to 1 1/2″. Size is specified in inches, usually fractional rather than decimal. Nut width and height vary with the size of the castle nut.
What size is a spindle nut socket?
This is an Omix-ADA Spindle Nut Socket tool. It’s made for a 1/2″ drive tool. This is the socket you need to remove the large nuts on the spindle. The size is 2 1/16″.
How tight should a spindle nut be?
Expert Reply: The nut on the spindle should be tightened until snug, with no side-to-side play in the hub and then backed off slightly, about maybe a 1/8 of a turn.