How do I wake my Synology on LAN?

How do I wake my Synology on LAN?

Quick reference notes:

  1. Log in to Disk Station Manager using your administrators credentials.
  2. Now choose Control Panel – Hardware and Power – General.
  3. In the General panel you will find an option called Enable WOL on LAN.
  4. Tick the check box to Enable WOL on LAN.
  5. Select Apply.

What port does Wake-on-LAN use?

UDP port 9
Wake-on-LAN uses UDP port 9 by default, to send WOL messages. This port is available for use on most Windows computers. However, if you have installed “Simple TCPIP services”, then Windows may be running the “discard” service.

What ports need to be open for Synology NAS?

7. Packages

Type Port Number Protocol
Synology Drive Server 80 (link sharing), 443 (link sharing), 5000 (HTTP), 5001 (HTTPS), 6690 (file syncing) TCP
Synology High Availability (HA) 123 (NTP), ICMP, 5000 (HTTP), 5001 (HTTPS), 1234, 9997, 9998, 9999 (Synology Assistant), 874, 5405, 5406, 7400-7999 (HA) TCP/UDP

How do you wake up a NAS?

Hold down the power button (in front of the NAS) for 1.5 seconds to shut down the NAS. You can either use ASUSTOR’s Control Center or AiMaster to wake your NAS after it has been powered off.

Do I need to port forward for WOL?

Wake-On-LAN uses UDP. Many utilities use ports 7 or 9, but you can use any port you like for this. You’ll need to forward a UDP port to all IP addresses behind your router—you can’t just forward to a specific IP address.

How do you port forward Wake-on-LAN?

Head to the port-forwarding section of your router—if you can’t find it, in a new window) can help—and forward the Wake-on-LAN port to your home network’s broadcast address. The port is usually port 7 or 9, and the broadcast address is usually something like 192.168.

What ports do nas use?

Web service

Name of Service Default Port Number Protocol
NAS Web 8080 TCP
Web Server (HTTP, HTTPS) 80, 8081 TCP

How do I wake up Synology from hibernation?

Enable auto poweroff:

  1. Go to Control Panel > Hardware & Power > HDD Hibernation and tick Enable auto poweroff.
  2. After your Synology NAS is automatically powered off, you can wake it up via the Internet or LAN by entering the Synology IP or DDNS and MAC address in a WOL application, such as Synology Assistant or DS finder.

How do I send a Wake-on-LAN packet?

Enable Wake-on-LAN in Windows Right-click on your Ethernet adapter—mine is called “Intel(R) l211 Gigabit Network Connection”—and select Properties. In the Advanced tab, scroll down to Wake On Magic Packet and ensure it is enabled using the drop-down box on the right.