How do I setup my N150 wireless router?

How do I setup my N150 wireless router?

  1. To connect the wireless router, the computer, and the modem:
  2. Turn off your computer.
  3. Turn off and unplug the cable or DSL broadband modem.
  4. Locate the cable (A) that connects your computer to the modem.
  5. Disconnect the cable at the modem end only (B). You will connect it to the router later.

How do I manually install a Netgear router?

To install your NETGEAR router using the router web interface:

  1. Using an Ethernet cable, connect your modem to the yellow Internet port on the back of your NETGEAR router.
  2. Connect your computer to one of the Ethernet ports on your router.
  3. Press the Power button on the router.
  4. Open a web browser and enter

How do I reset my Netgear wnr612 router?

How to reset a router to factory defaults

  1. Step 1: Find the reset button. There should be a tiny reset button.
  2. Step 2: Push the reset button. While the router is on, push and hold the reset button.
  3. Step 3: Hold the reset button.
  4. Step 4: Reboot the router.
  5. Step 5: Log in to the router.

How do I install Netgear without CD?

Netgear routers provide a wireless access point for a network….How to Install a Netgear Wireless Router Without the CD

  1. Turn off your computer and modem.
  2. Locate the Ethernet cable that runs from your modem to your computer.
  3. Take the unplugged end and plug it into the Ethernet port on the back of the Netgear router.

What is the range of Netgear N150 wireless router?

The router’s N150 technology supports wireless speeds of up to 150Mbps when used with other N150 devices….Netgear N150 Specs.

Base Station
Network Protocol TCP/IP
Data Rate N150: 150Mbps 802.11g: 54Mbps 802.11b: 11Mbps RJ-45: 10/100Mbps
Frequency Range 2.4GHz
Channel Support 11

How do I setup my NETGEAR router with Ethernet?

To connect the cables to your NETGEAR router:

  1. Connect your modem to the wall jack for your Internet service.
  2. Plug in and turn on your modem.
  3. Using the Ethernet cable included with your router, connect the Ethernet port on your modem to the Internet port of your router.

What do I do after I factory reset my Netgear router?

After factory resetting the unit, you will need to reconfigure the settings in order to get online. Factory reset will wipe out all the settings on your router. So, previous settings are erased and therefore you will need to re-input the settings that you had.

Can I install WiFi adapter without CD?

Install the wireless network adapter by plugging it into your computer’s USB port or sliding the wireless adapter card into the PC card slot on the side of your laptop.