What do the lights mean on the Roomba?

What do the lights mean on the Roomba?

Light Ring While Idle Solid white: Fully charged. Pulsing red: Charging, too low to start cleaning. Solid red: Error (tap Clean for details). Red sweep toward rear: Empty the bin. Blue clockwise spinner: In Wi-Fi pairing mode.

What does it mean when your iRobot is flashing orange?

A slow flashing orange light means that the Roomba is charging normally. A quick flashing orange light means that the Roomba has entered the 16-hour refresh charge because the battery is significantly discharged. A flashing red light means the battery charge is too low to start cleaning.

How do I reboot my Roomba?

For all robots with the Dock and Spot buttons and no green dot: Press and hold HOME and SPOT Clean buttons on your robot for 10 seconds. When the button is released, Roomba will play the reboot tone. Wi-Fi connected Roomba 800 series.

Why is my Roomba not working properly?

If your Room Clean Button is Not Working, check the batteries for defects, power cycle or reset your Roomba, clean dust out of your Roomba, clean its Electrical Contacts and Filter, contact Customer Support, or replace your Roomba.

Does Roomba base light stay on when charging?

When the Roomba is properly charging, you won’t see any lights on the device itself. These are purposely shut off to conserve energy. However, if a problem occurs, the device will say “uh-oh,” and a troubleshooting light will blink. The number of times it blinks consecutively alerts you to the problem.

What does Roomba red ring mean?

Pulsing Red. If the red light ring around the CLEAN button is pulsing, the Roomba i Series battery charge is too law to start cleaning. Make sure that the robot is docked to the Home Base or the Clean Base™ (for i7+ models) to start charging the battery.

Does Roomba light stay on when charging?

Be Patient When Charging a New Battery When it does, the light on the base station will go out, and the battery indicator on Roomba will begin flashing. It too will go out after a minute. The CLEAN button indicates the status of the charge.

How do I know if iRobot is charging?

Charge Roomba using the Home Base. Indicator lights will turn off after 60 seconds to conserve energy while Roomba is charging. Check status of the battery by pressing the CLEAN button to illuminate the Battery Indicator. Indicator will appear amber while the battery is charging and solid green when fully charged.

What are the buttons on Roomba?

To pause Roomba during a cleaning cycle, press CLEAN. » To resume the cleaning cycle, press CLEAN again. » To send Roomba back to the Home Base, press (Dock) • To end the cleaning cycle and put Roomba in standby mode, press and hold CLEAN until Roomba’s indicators turn off.

Can you manually control a Roomba?

The new iRobot HOME app for iOS and Android acts like a hub for all your platform products. With the app, you can start or end cleaning jobs, tell your Roomba to go back to its base, or schedule vacuum times (like, say, when you aren’t home, or just before you get back from vacation).